Si vous désirez flasher votre TYTN II pour changer de langue, mettre une rom sans personnalisation opérateur ou une rom bidouillé, voici la marche à suivre :
Après avoir flashé avec le HARD SPL, vous pourrez flasher votre ppc avec la rom de votre choix (Toutes les roms disponibles pour le Kaiser sont compatibles.)
Principales fonctionnalitées du HARD SPL.
- SuperCID / Security Level=0
- Ne vérifie pas les signatures des fichiers NBH. (vous pourrez donc installer une rom bidouiller)
- Basé sur le bootloader MFG 1.50, rtask activé.
- Acceptes tous les mots de passe.
- Connectez votre ppc à votre pc à l'aide du cable USB.
- Assurez vous que l'icone de activesync soit VERTE
- Lancez kaiser-HardSPL.exe sur votre pc.
- Suivez les instructions à l'écran.
Please make sure ActiveSync is enabled (GREEN icon in systray)
and hit ENTER to start...
Kaiser JumpSPL is running on your device, please check your device
screen and follow the steps until you see the tri-color screen.
When done hit ENTER to continue...
Device screen should be now TRI-COLOR and show "USB"
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
ActiveSync icon should become gray after that.
When done hit ENTER to continue...
Phone screen should now be tri-color and the activesync icon gray
if not, the loading process has failed and you'll have to repeat it again.
If all was OK hit ENTER and the standard "PDA Phone ROM Update Utility"
window will start, allowing you to flash HardSPL on your device.
Hit CTRL+C to Cancel or ENTER to continue...
Follow the steps on the wizard to flash HardSPL, when finished your
device will reboot. It should last no more than 1 minute.
- Launching RUU, please wait...
Process is finished, congratulations!
If you find it useful don't forget to donate
*****************************************************************************
©2007 pof - XDA Developers
Hit ENTER to quit.