ExpertGsm vous présente le fameux tutoriel pour flasher chez soi les nokia BB5
Ce TUTORIEL explique comment mettre a jour son Nokia BB5 avec les tous derniers firmware, juste avec un câble USB DKU-2 et avec le logiciel PHOENIX Service de Nokia !
(Sans dongle a acheter !!!)
Cette méthode a réussie à 100% sur un Nokia 6680 bloqué chez ORANGE et un autre sur SFR !
Attention !! Je vous avertis qu’en aucuns cas expertgsm et zoolcopa ne sont responsables des dommages qui pourront être créé suite a une mauvaise manipulation !!
Et je vous avertis que vous risquez de perdre votre garantie !
Donc après les avertissements et pour ceux qui veulent continuer, passons à la manipulation sans plus attendre
AVANT DE COMMENCER !
Avant de commencer ce tutoriel, Il faudra :
- Charger la batterie à fond
- Désinstaller Nokia pc suite et Nokia conectivity cable driver !
INSTALLATION DE DIEGO
D’abord téléchargez tout les fichiers qui se trouvent a cette adresse :
[Edité par Vincka : Censure Nokia]
Dézipper les fichiers 55667793_Diego_3_06.
Vous aurez ce fichier a la fin : 55667793_Diego_3_06.msi
Lancez le et installez le !
Lors de l’Installation, si il vous met une erreur, c’est que vous n’avez pas désinstaller Nokia connectivity cable driver !
Diego installé !
INSTALLATION DE PHOENIX SERVICE 2004
Maintenant nous allons installer phoenix services 2004 !
Pour cela téléchargez tous les fichiers .rar qui se trouvent a cette adresse :
[Edité par Vincka : Censure Nokia]
Dézippez les fichiers Phoenix 2004 avec crack.rar
Ouvrez d’abord le crack qui se trouve dans le dossier, ouvrez le, ne le lancez pas maintenant !
Commencez à installer phoenix 2004.
Lors de l’installation il y aura un message.
!!!!!! La il faudra bien suivre ce qui suit ! !!!!
Appuyez sur recommencer et lancer le crack tout de suite après !
Si vous n’êtes pas assez rapide il vous remarquera le message et il faudra réouvrir le crack,
Sans le lancer, appuyer sur recommencer et exécuter le crack !
A la fin de l’installation, phoenix va vous demander de redémarrer, redémarrez le PC.
Une fois le pc rallumé il y aura 2 messages d’erreur faite toujours OK puis terminer.
A ce stade vous avez correctement installé phoenix service 2004.
Ensuite on va installer le fichier
Nokia_Conn_Cable_Driver_159_ita.rar
[Edité par Jonathandu54: rajout du lien ]
Nokia_Conn_Cable_Driver_159_ita.rar qu’il faudra déziper et installer, si il vous demande de redémarrer, il faudra le faire !
LANCEMENT DE PHOENIX SERVICE 2004
Sur votre bureau il y a le raccourci de phoenix.
Lancez le et au lancement de phoenix il y aura 4 fois "dskey not found" !
C’est normal faites toujours "ok" !
La, phoenix devrait s’ouvrir !
Arrivé a ce stade ne fermé pas le logiciel ! Il faudra juste le diminuer !
Ensuite téléchargez tout les .rar qui se trouve sur cette adresse :
[Edité par Vincka : Censure Nokia]
Dézippez les fichier et vous aurez ce fichier : phoenix_service_sw_2005_36_7_112.exe
Lancez phoenix_service_sw_2005_36_7_112.exe !
il ne devrait pas y avoir d’erreur !
Et surtout a la fin de l’installation ! Ne redémarrer pas ! Cocher "redémarrer mon pc plus tard" !
Et terminer !
Ensuite vous pouvez fermer Phoenix que vous aviez diminué ! Et relancez le !
Maintenant vous pouvez brancher votre câble USB DKU2 au pc, et y brancher votre téléphone.
Attendez que Windows installe les pilotes, puis ne toucher plus a votre téléphone car le câble ne s’accroche pas bien et pourrait se détacher !
Ensuite dans phoenix faites ces manipulations :
Faites fichier / Manage conection / Add / Manual / sélectionnez USB/ appuyer sur Terminer/ Aplly et Close .
Télécharger le fichier RM36 qui se trouve sur ce lien RM-36.rar
Dézippez le fichier RM36 sur le bureau.
Il doit avoir 2 fichier ;
-1 qui se fini par .COR
-1 autre qui se fini par .v30
PASSONs AU FLASHAGE
Revenez sur phoenix, faites :
flashing/ sw update
A droite de Code il devrai être écrit RM36 si c’est le cas, ça veut dire que vous êtes sur la bonne voie.
- Sur la première ligne à Image File, faite browse et allez chercher votre fichier se terminant par .COR .
- sur la seconde ligne à PPM File , faite browse et allez chercher votre fichier qui se termine par .V30 .
ATTENTION, la il faudra faire vraiment attention pendant le flash et ne touchez surtout pas votre mobile !!!
Faite START et attendez qu'il y est un message !
La il vous dira d’appuyer sur le bouton ON du Téléphone et ok sur le logiciel Phoenix ! Et c’est terminer les amis !
Pour ceux qui veulent flasher les Nokia plus récent ( ex : N70, N90).
Il faudra pour cela suivre exactement la même manip mais sauf qu’au lieu d’installer PHOENIX 2005, il faudra installer PHOENIX 2006 qui se trouve aussi sur mon site !
Tuto crée par zoolcopa avec l’accord d’expertgsm
EXPERTGSM IS THE BEST !!!!
Traduction du tuto en anglais par anakronik
This TUTORIEL explains how to update its Nokia BB5 with the all last firmware, just with a cable USB DKU-2 and the software PHOENIX Service of Nokia!
(Without dongle has to buy!!!)
This method succeeded at 100% on Nokia 6680 blocked at ORANGE and another on SFR!
Caution!! I informed you whithout case expertgsm and zoolcopa is not responsible for the damage which could be created following a bad handling!!
And I informed you that you are likely to lose your guarantee!
Thus after the warnings and for those which want to continue, let us pass to handling without waiting more
BEFORE STARTING!
For beginning this tutoriel, It will be necessary:
- To charge the battery full
- uninstall Nokia PC continuation and Nokia conectivity cable driver!
First download all the files which are has this address:
[ Published by Vincka: Censure Nokia ]
Unpack the files 55667793_Diego_3_06.
You will have this file has the end: 55667793_Diego_3_06.msi
Launch it and install it!
At the time of l_Installation, if it puts an error to you, c’est which you do not n’avez désinstaller Nokia connectivity cable driver!
Diego installed!
INSTALLATION OF PHOENIX SERVICE 2004
Now we will install phoenix services 2004!
For that download all the rar files which are has this address:
[ Published by Vincka: Censure Nokia ]
- Unpack the files Phoenix 2004 with crack.rar
- Open to first the ace who is in the file, open it, do not launch it now!
- Start to install phoenix 2004.
!!!!!! It will be necessary well to follow what follows !!!!
Support on starting again and launching the ace immediately afterwards!
If you are not fast enough it the message and must be open again the ace will notice you,
Without the throw, to support on starting again and carrying out the ace!
To the end of l_installation, phoenix will require of you to start again, start again the PC.
Once the read PC there will be 2 messages d_error always made OK then finish.
This stage you correctly installed phoenix service 2004.
Then one will install the file
Nokia_Conn_Cable_Driver_159_ita.rar
[ Published by Jonathandu54: addition of the bond ]
Nokia_Conn_Cable_Driver_159_ita.rar qu’il will be necessary unpack and to install, if it asks you to start again, it will have to be done!
LAUNCHING OF PHOENIX SERVICE 2004
- On your desk there is the short cut of phoenix.
- Launch it and with the launching of phoenix there will be 4 times "dskey not found"!*
phoenix should be open!
Arrived has this stage closed not the software! It will have just to be decreased!
Then download all the rar which is on this address:
[ Published by Vincka: Censure Nokia ]
Unpack the file and you will have this file: phoenix_service_sw_2005_36_7_112.exe
Launch phoenix_service_sw_2005_36_7_112.exe!
there should not be d_error!
And especially the end of l_installation has! Not to start again not! To notch "to start again my PC later"!
And to finish!
Then you can close Phoenix which you had decreased! And start again it!
Now you can connect your cable USB DKU2 with the PC, and connect your mobile phone there.
Wait until Windows installs the drivers, then not to touch more has your mobile phone because the cable catched not well and could be out!
Then in phoenix made this handling:
Make file/Manage conection/Add/Manual/select USB/ to support on END/ Aplly and Close.
To download the file RM36 which is on this RM-36.rar bond
Unpack the file RM36 on the desk.
It must have 2 file:
- 1 which finished by .COR
- 1 other which finished by .v30
Return on phoenix, make:
flashing/ sw update
- On right-hand side of Code it will have to be written RM36 if it's the case, that wants to say that you are on the good way.
[list] - On the first line with Image, made browse Slips by and will seek your file ending in COR.
- On the second line with PPM, made browse Slips by and will seek your file which ends in V30.
Made START and wait until it is a message there!
He will say to support on the button ONE to you Telephone and ok on the Phoenix software! And it's finish my friends!
For those which want flasher more recent Nokia (ex: N70, N90).
It will be necessary for that to follow the same manipulation exactly but except install PHOENIX 2005, it will be necessary to install PHOENIX 2006 which is also on my site!
Tutoriel created by zoolcopa with agreement of expertgsm
EXPERTGSM IS THE BEST!!!!