Hi,

I can't speak frehnch and hope anyone can speak German or English here!

I have to flashed the Firmware A22 on my mobile for unlock it.
That functioned, but after I wanted to flash the version A53 XPStyle on my GD87 seem the bootrange to have been damaged.
The Handy cannot be switched on any longer.

Does somebody have an idea what i can do?


_________________________________________________________________

Translate to French by Google:

j'ai la version A22 sur mon mobilophone geflasht autour de lui à unlocken. Cela a fonctionné, mais après que je voulais la version A53 XPStyle sur mon GD87 flashen semble le secteur de bateau avoir été endommagé . Le mobilophone ne peut plus être mis en circuit. Quelqu'un a-t-il une idée?


Thank you


Gery


[Edité par SnowKhan: Topic renamed cause non conformity with the rules ]

Hi Gery !

You're mobile phone can't be switched on at all ?

is there a red light when you plug it into to your battery charger ?


____________________________________________________

Translate to German by Google :

Hallo Gery! Sie sind bewegliches Telefon können nicht an allen eingeschalten werden? gibt es ein rotes Licht, wenn Sie es in zu Ihr Ladegerät verstopfen?

Hi SnowKhan,

thank you for your answer...

I connected my phone with my USB Datacable on my PC.

Then i selected the update files in WinMoDo and clicked on Start download.
In the window, i saw the message "Signaling..."

The Download Time started, but nothing happens.
After a minute i stopped the procdure.

I know it was stuppid, but what can i do now?

now my mobile cannot be switched on any longer.

The red led, if i connect my phone on the charger, is on.
But the indication "charging" does not shine on the display.

PLEASE HELP!


Best regards

Gery

yes

YES ??????

Say me, what can i do...!!!

you should try to flash again the firmware with winmodo but if you say that you can't switch it on the phone it's a bad luck sign...

What about cb2000 ? have you tried to connect your mobile phone to CB2000 ? (with scotch in pin 4 and 10)

Akira : you're a Boulay !

Hi,

i tried to flash Ver. A22 on my mobile, for unlock it.
the flash procedure functioned, when I was finished with the flash procedure, i tried to unlock the phone with crack2d, was there an error message.

I thought, i try directly the modified XP Version A53.

and with this second attempt it happened then...

If i try to connect my phone (i clicked on Handset Power) with cd200 (scotch Pin 4 and 10) there is an error message who says: Failed open comms. to handset.

Please Help!!

it seems that you damaged your boot sector by removing the cable while the phone was erasing these part.
sorry to say that your phone is dead and that the only way is to reprogram the eprom and it could be done only on shop by disassembling the chipset..
all that i can advice you is to try to flash again and again (a22) sometime it works..but not 100% garanteed..
try with and without the sim card also..
best of luck...

what an amazing english speaking V-Jay !

your english is quite good too!
thanks anyway