Aller au contenu



Photo

[iPhone 1.0.2] Tuto : Virginization auto.


  • Veuillez vous connecter pour répondre
Aucune réponse à ce sujet

#1 ToiNou

ToiNou

    Nokia & iPhone Addict (L)

  • +Membres +
  • 6759 messages
  • Sexe:Non renseigné
  • Mobile:-----
  • Opérateur:-----

Posté 29 Oct 2007 - 14:41

Salut !

Voici enfin un tuto tout simple à la porté de tout le monde pour virginizer son iPhone.

Pourquoi virginizer ?

Si vous avez un iPhone v1.0.2 et que vous l'avez désimlocker à l'aide de iUnlock ou de AnySim, et que vous voulez passez au firmware 1.1.1, il vous faudra virginizer votre iPhone, c'est à dire le rendre dans son état d'usine (simlocké AT&T), afin de faire une mise à jour sans problèmes.

Mise en garde :

Avant de bidouiller votre iPhone, il est important de vous mettre en garde sur deux ou trois choses :
  • Les méthodes qui sont présentées sur ce forum ne sont pas des méthodes miracles et la fiabilité a 100% ne peut être garantie (une fausse manip' est si vite arrivée). Vous réalisez donc les manipulations en connaissance de cause.
  • Nous déclinons toute responsabilité en cas de fausse manipulation de votre part.
  • Surtout, ne vous lancez pas dans une méthode ou vous ne comprenez pas ce qui va se passer ou les étapes a suivre.
Ce que vous aurez besoin :

Un iPhone v1.0.2 désimlocké à l'aide de iUnlock ou de AnySIM, la carte SIM de votre opérateur Français (Orange/SFR/Bouygues) insérée dans votre iPhone. Aussi, il faut avoir préalablement installé : BSD subsystem, Open SSH, Community sources depuis Installer.

La marche à suivre :

1. Téléchargez puis dézippez ce pack
2. Ouvrez Fugu puis copiez le dossier dans votre iPhone à cet endroit : usr/bin
Si lors de la connexion, Fugu vous met : "host name changed blabla", il suffit d'aller dans les préférences de Fugu/hotes connus/ cliquer sur la/les lignes remplies et les effacer. Sauvegarder et hop relancez la connexion.
3. Quitter Fugu (après avoir copier le pack).
4. Ouvrez une fenêtre de Terminal sur votre Mac.
Si vous ne savez pas comment faire, tapez Terminal dans Spotlight et ouvrez "Terminal".
[list]
[*]Connectez vous à votre iPhone ; pour cela, tapez ceci dans le Terminal :
# cd usr/bincd: no such file or directory: usr/bin# cd /usr/bin# cd virginizer_pack# ./virginator.shWhat do you want to do?---1) Just backup my seczone.2) Backup my seczone and re-virginize.---2virginator.sh: You chose to backup your seczone and re-virginize.virginator.sh: Starting...virginator.sh: ==== Beginnning sanity checks ====virginator.sh: Checking for launchctl...virginator.sh: Found "/bin/launchctl"virginator.sh: Checking for norz...virginator.sh: Found "/usr/bin/virginizer_pack/norz".virginator.sh: Checking for iUnlock...virginator.sh: Found "/usr/bin/virginizer_pack/iUnlock".virginator.sh: Checking for bbupdater...virginator.sh: Found "/usr/bin/virginizer_pack/bbupdater".virginator.sh: Checking for 3.14 firmware files...virginator.sh: Found "/usr/bin/virginizer_pack/ICE03.14.08_G.eep".virginator.sh: Found "/usr/bin/virginizer_pack/ICE03.14.08_G.fls".virginator.sh: Checking for eliteloader.bin...virginator.sh: Found "/usr/bin/virginizer_pack/eliteloader.bin".virginator.sh: Checking for secpacks...virginator.sh: Found "/usr/bin/virginizer_pack/314secpack".virginator.sh: Found "/usr/bin/virginizer_pack/401secpack".virginator.sh: ==== All checks passed ====virginator.sh: Stopping CommCenter...virginator.sh: Done.Would you like to backup the seczone? (yes/no)yesvirginator.sh: Creating a backup of the NOR seczone...geohot's nor dumperall your norz are belong to ussuper fast...just the way i like itDumping: A03FA000-A03FC000Waiting for data...Got Header: 77 0b ccIncreasing baud rate...02 00 82 00 04 00 00 10 0E 00 A4 00 03 0002 00 01 08 14 00 00 00 00 00 A4 00 03 00 09 0000 00 33 2E 39 5F 4D 33 53 32 C3 0A 03 0002 00 84 00 00 01 01 00 00 00 89 00 00 00 62 8800 00 03 00 00 00 00 00 00 00 01 00 00 00 02 0000 00 00 00 40 00 3F 00 00 00 00 00 01 00 08 0000 00 00 20 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 A6 03 03 0002 00 85 00 02 00 FF FF 85 02 03 0002 00 02 08 06 00 00 00 01 02 03 00 0E 08 03 00Wrote: 0xa03fa000Wrote: 0xa03fb000Dumpedvirginator.sh: Done.  Please copy "seczone.backup" to some place safe.Would you like to virginize your seczone? (yes/no)yesvirginator.sh: Virginizing...iUnlock v43.hiBaud -- Copyright 2007 The dev teamCredits: Daeken, Darkmen, guest184, gray, iZsh, pytey, roxfan, Sam, uns, Zappaz, ZfSending baudrate command speed 921600Sending Begin Secpack commandSending Erase commandWaiting For Erase Completion...OKFlashing09%18%28%37%46%56%65%75%84%93%OKSending End Secpack commandValidating the write commandFW are equal!Completed.Enjoy!virginator.sh: Done.virginator.sh: Checking baseband status...Resetting target...pinging the baseband...baseband unresponsive to pingingDonevirginator.sh: You must reflash the 3.14.08 baseband firmwarevirginator.sh: in order to complete the re-virginization process.virginator.sh: Would you like to reflash the firmware? (yes/no)yesvirginator.sh: Reflashing...Preparing to flash using /dev/tty.baseband at 750000 baudPlease reset targetResetting target...ProcessDetailUpdated: Boot-loader is activeProcessDetailUpdated: EBL version: 3.9_M3S2 3..9ProcessDetailUpdated: Boot mode is: CCProcessDetailUpdated: Baud rate set to 750000ProcessDetailUpdated: Get flash id.ProcessDetailUpdated: CFI stage 1ProcessDetailUpdated: Flash ID is: 88620089ProcessDetailUpdated: CFI stage 2ProcessDetailUpdated: Boot process finishedProcessOutlineUpdated: Reading SW version dataProcessDetailUpdated: Receiving data.ProgressUpdated: 100ProcessDetailUpdated: Upload OKProcessOutlineUpdated: Process time was 132 msec.Upgrade from  toDownloading EEPProcessOutlineUpdated: Start downloading from file /usr/bin/virginizer_pack/ICE03.14.08_G.eep.ProcessDetailUpdated: Sending sec-pack.ProcessDetailUpdated: Load region 0ProcessDetailUpdated: Sending end-pack.ProcessDetailUpdated: Checksum OK.ProcessDetailUpdated: Verify OKProcessOutlineUpdated: Process time was 1812 msec.Downloading FLSProcessOutlineUpdated: Start downloading from file /usr/bin/virginizer_pack/ICE03.14.08_G.fls.ProcessDetailUpdated: Erasing the dynamic eeprom areaProgressUpdated: 100ProcessDetailUpdated: Sending sec-pack.ProcessDetailUpdated: Load region 0ProcessDetailUpdated: Sending data.ProgressUpdated: 0ProgressUpdated: 2ProgressUpdated: 4ProgressUpdated: 5ProgressUpdated: 7ProgressUpdated: 8ProgressUpdated: 10ProgressUpdated: 11ProgressUpdated: 13ProgressUpdated: 15ProgressUpdated: 16ProgressUpdated: 18ProgressUpdated: 19ProgressUpdated: 21ProgressUpdated: 22ProgressUpdated: 24ProgressUpdated: 25ProgressUpdated: 27ProgressUpdated: 29ProgressUpdated: 30ProgressUpdated: 32ProgressUpdated: 33ProgressUpdated: 35ProgressUpdated: 36ProgressUpdated: 38ProgressUpdated: 40ProgressUpdated: 41ProgressUpdated: 43ProgressUpdated: 44ProgressUpdated: 46ProgressUpdated: 47ProgressUpdated: 49ProgressUpdated: 50ProgressUpdated: 52ProgressUpdated: 54ProgressUpdated: 55ProgressUpdated: 57ProgressUpdated: 58ProgressUpdated: 60ProgressUpdated: 61ProgressUpdated: 63ProgressUpdated: 65ProgressUpdated: 66ProgressUpdated: 68ProgressUpdated: 69ProgressUpdated: 71ProgressUpdated: 72ProgressUpdated: 74ProgressUpdated: 75ProgressUpdated: 77ProgressUpdated: 79ProgressUpdated: 80ProgressUpdated: 82ProgressUpdated: 83ProgressUpdated: 85ProgressUpdated: 86ProgressUpdated: 88ProgressUpdated: 90ProgressUpdated: 91ProgressUpdated: 93ProgressUpdated: 94ProgressUpdated: 96ProgressUpdated: 97ProgressUpdated: 99ProgressUpdated: 100ProcessDetailUpdated: Load region 1ProcessDetailUpdated: Sending data.ProgressUpdated: 0ProgressUpdated: 1ProgressUpdated: 2ProgressUpdated: 3ProgressUpdated: 4ProgressUpdated: 5ProgressUpdated: 6ProgressUpdated: 7ProgressUpdated: 8ProgressUpdated: 9ProgressUpdated: 10ProgressUpdated: 11ProgressUpdated: 12ProgressUpdated: 13ProgressUpdated: 14ProgressUpdated: 15ProgressUpdated: 16ProgressUpdated: 17ProgressUpdated: 18ProgressUpdated: 19ProgressUpdated: 20ProgressUpdated: 21ProgressUpdated: 22ProgressUpdated: 23ProgressUpdated: 24ProgressUpdated: 25ProgressUpdated: 26ProgressUpdated: 27ProgressUpdated: 28ProgressUpdated: 29ProgressUpdated: 30ProgressUpdated: 31ProgressUpdated: 32ProgressUpdated: 33ProgressUpdated: 34ProgressUpdated: 35ProgressUpdated: 36ProgressUpdated: 37ProgressUpdated: 38ProgressUpdated: 39ProgressUpdated: 40ProgressUpdated: 41ProgressUpdated: 42ProgressUpdated: 43ProgressUpdated: 44ProgressUpdated: 45ProgressUpdated: 46ProgressUpdated: 47ProgressUpdated: 48ProgressUpdated: 49ProgressUpdated: 50ProgressUpdated: 51ProgressUpdated: 52ProgressUpdated: 53ProgressUpdated: 54ProgressUpdated: 55ProgressUpdated: 56ProgressUpdated: 57ProgressUpdated: 58ProgressUpdated: 59ProgressUpdated: 60ProgressUpdated: 61ProgressUpdated: 62ProgressUpdated: 63ProgressUpdated: 64ProgressUpdated: 65ProgressUpdated: 66ProgressUpdated: 67ProgressUpdated: 68ProgressUpdated: 69ProgressUpdated: 70ProgressUpdated: 71ProgressUpdated: 72ProgressUpdated: 73ProgressUpdated: 74ProgressUpdated: 75ProgressUpdated: 76ProgressUpdated: 77ProgressUpdated: 78ProgressUpdated: 79ProgressUpdated: 80ProgressUpdated: 81ProgressUpdated: 82ProgressUpdated: 83ProgressUpdated: 84ProgressUpdated: 85ProgressUpdated: 86ProgressUpdated: 87ProgressUpdated: 88ProgressUpdated: 89ProgressUpdated: 90ProgressUpdated: 91ProgressUpdated: 92ProgressUpdated: 93ProgressUpdated: 94ProgressUpdated: 95ProgressUpdated: 96ProgressUpdated: 97ProgressUpdated: 98ProgressUpdated: 99ProgressUpdated: 100ProcessDetailUpdated: Sending end-pack.ProcessDetailUpdated: Checksum OK.ProcessDetailUpdated: Verify OKProcessOutlineUpdated: Process time was 1 min 51  sec.Resetting target...pinging the baseband...issuing +cpwroff...Donevirginator.sh: Done.virginator.sh: Checking baseband status...Resetting target...pinging the baseband...issuing +xgendata...    firmware: DEV_ICE_MODEM_03.14.08_G eep version: EEP_VERSION:207eep revision: EEP_REVISION:7  bootloader: BOOTLOADER_VERSION:3.9_M3S2Donevirginator.sh: Starting CommCenter...virginator.sh: Done.virginator.sh: Exiting now...#

Voilà !
Vous pouvez maintenant faire l'upgrade en v.1.1.1 en toute tranquillité !

Remerciements : Elite Dev Team et FrenchiPhone








0 utilisateur(s) li(sen)t ce sujet

0 membre(s), 0 invité(s), 0 utilisateur(s) anonyme(s)